Configurator Hose Assemblies

Home
Select Hose Type

Selection Guide
* detailed Information for used media and operation conditions required.
Media Search Composite Hose 

2

0

Economy
Economy

Fuelling hoses for petroleum based products, simplified economy version.
Lining: NBR

Fuelling hoses for petroleum based products, simplified economy version.
Lining: NBR

Additional Info

3

0

Slimline
Slimline

Petrol pump hoses according to EN 1360 and EN 13483. For gasoline and diesel fuels.
Lining: NBR

Petrol pump hoses according to EN 1360 and EN 13483. For gasoline and diesel fuels.
Lining: NBR

Additional Info

4

0

Orange Band (LPG)
Orange Band (LPG)

LPG hoses according to EN 1762 for propane, butane, and their mixtures. Type LPG 16 also for AdBlue. Lining: NBR

LPG hoses according to EN 1762 for propane, butane, and their mixtures. Type LPG 16 also for AdBlue. Lining: NBR

Additional Info

5

0

Lilac Band (CHD / CHS)
Lilac Band (CHD / CHS)

Chemical hoses according to EN 12115 for over 75% of all industrial chemicals.
Lining: EPDM

Chemical hoses according to EN 12115 for over 75% of all industrial chemicals.
Lining: EPDM

Additional Info

6

0

Blue Band (LMD / LMS)
Blue Band (LMD / LMS)

Solvent hoses according to EN 12115 for solvents, paints and other mediums.
Lining: NBR 2

Solvent hoses according to EN 12115 for solvents, paints and other mediums.
Lining: NBR 2

Additional Info

7

0

Universal Hoses (UPE)
Universal Hoses (UPE)

Universal hoses according to EN 12115 for almost all chemical and petroleum based products.
Lining: UPE

Universal hoses according to EN 12115 for almost all chemical and petroleum based products.
Lining: UPE

Additional Info

8

0

Universal Hoses (FEP / PTFE)
Universal Hoses (FEP / PTFE)

Universal hoses according to EN 12115 for almost all mediums.
Lining: FEP / PTFE

Universal hoses according to EN 12115 for almost all mediums.
Lining: FEP / PTFE

Additional Info

9

0

Special Hoses
Special Hoses

Special hoses for foodstuffs, ammoniac, hot air, cement, hot asphalt, steam and hot water.

Special hoses for foodstuffs, ammoniac, hot air, cement, hot asphalt, steam and hot water.

Additional Info

10

0

PAL Quality Hoses
PAL Quality Hoses

PAL hoses (ex 'Paguag') for the chemical industry.

PAL hoses (ex 'Paguag') for the chemical industry.

Additional Info

12

0

'FWS' Composite Hoses
'FWS' Composite Hoses

Multi-layer thermoplastic hoses according to EN 13765. Delivery as checked hose assembly.
Lining: PP / PTFE / PA (6 types)

Multi-layer thermoplastic hoses according to EN 13765. Delivery as checked hose assembly.
Lining: PP / PTFE / PA (6 types)

Additional Info

13

0

Type HD
HD
Type HD

High Pressure Fuelling Hose (without helix)

'Yellow Band' high pressure fuelling hose without helix for reel operation. Ideal for all petroleum based products. Temperature range -30° up to +90° C (temporarily up to +110° C). Electrical conductivity <106 Ohm. Corresponds to EN 1761. Can be calibrated according to European regulations. Approved acc. to German military standard VG 95 955 Typ D. Corresponds to EN 12115.

DN 10 to DN 100

'Yellow Band' high pressure fuelling hose without helix for reel operation. Ideal for all petroleum based products. Temperature range -30° up to +90° C (temporarily up to +110° C). Electrical conductivity <106 Ohm. Corresponds to EN 1761. Can be calibrated according to European regulations. Approved acc. to German military standard VG 95 955 Typ D. Corresponds to EN 12115.

Additional Info

15

0

Type TW
TW
Type TW

Tank Truck Hose (with steel helix)

'Yellow Band' smooth bore tank truck hose with kink resistant steel helix for all petroleum based products with an aromatic content up to 50%. Temperature range -30° up to +90° Celsius. Electrical conductivity <106 Ohm. Approved to German military standard VG 95 955 type S. Complies with EN 12115 and EN 1761.Type STW = reinforced TW design. Particularly suitable as marine bunker hose (details see catalogue page 129).

DN 19 to DN 200

'Yellow Band' smooth bore tank truck hose with kink resistant steel helix for all petroleum based products with an aromatic content up to 50%. Temperature range -30° up to +90° Celsius. Electrical conductivity <106 Ohm. Approved to German military standard VG 95 955 type S. Complies with EN 12115 and EN 1761.Type STW = reinforced TW design. Particularly suitable as marine bunker hose (details see catalogue page 129).

Additional Info

16

0

Type LTW
LTW
Type LTW

Light Weight Tank Truck Hose (with steel helix)

'Yellow Band' light weight tank truck hose with smooth bore and with corrugated cover. Easy to handle due to high flexibility. Same material, range of application and the yellow bands as type TW.

DN 50 to DN 100

'Yellow Band' light weight tank truck hose with smooth bore and with corrugated cover. Easy to handle due to high flexibility. Same material, range of application and the yellow bands as type TW.

Additional Info

18

0

Type LG
LG
Type LG

Lightweight Gravity Discharge
Road Tanker Hose Type 'LG'

Elaflex provides a new solution for fuel delivery to petrol stations: Type 'LG' Lightweight Gravity Discharge road tanker hoses.The easy to handle rubber hose has been developed for pressureless service, to fill underground storage tanks. At a glance: excellent flexibility – also in winter operation, low weight, high flowrate due to smooth bore, robust, suitable for tough continuous operation.

DN 51 to DN 102

Elaflex provides a new solution for fuel delivery to petrol stations: Type 'LG' Lightweight Gravity Discharge road tanker hoses.The easy to handle rubber hose has been developed for pressureless service, to fill underground storage tanks. At a glance: excellent flexibility – also in winter operation, low weight, high flowrate due to smooth bore, robust, suitable for tough continuous operation.

Additional Info

19

0

Type GPS
GPS
Type GPS

Vapour Recovery Hose (with steel helix)

Type GPS is a flexible, lightweight hose for Stage 1B balanced vapour recovery (during the unloading of road tankers into the storage tank).For the assembling, clamp type SPANNLOC or SPANNFIX fittings can be used. If the steel  helix is connected at both ends, GPS is suitable for electronic filling cross-over-prevention systems.Designed for 10 bar working pressure with safety factor of 4. Temperature range -30° up to +90° C. 

DN 50

Type GPS is a flexible, lightweight hose for Stage 1B balanced vapour recovery (during the unloading of road tankers into the storage tank).For the assembling, clamp type SPANNLOC or SPANNFIX fittings can be used. If the steel  helix is connected at both ends, GPS is suitable for electronic filling cross-over-prevention systems.Designed for 10 bar working pressure with safety factor of 4. Temperature range -30° up to +90° C. 

Additional Info

20

0

Type HD-C
HD-C
Type HD-C

Aircraft Refueling Hose (without helix)

'Yellow Band' aircraft refuelling hoses, suitable for all aviation gasolines and jet fuels (JET A 1), deicing fluids and motor oils. Temperature range -30° up to +90° Celsius. Electrical resistance between 10³ and 106 Ohm.

DN 10 to DN 100

'Yellow Band' aircraft refuelling hoses, suitable for all aviation gasolines and jet fuels (JET A 1), deicing fluids and motor oils. Temperature range -30° up to +90° Celsius. Electrical resistance between 10³ and 106 Ohm.

Additional Info

21

0

Type VHD-C
VHD-C
Type VHD-C

Aviation Refuelling Hose (without helix)

'Yellow Band' aircraft refuelling hoses, suitable for all aviation gasolines and jet fuels (JET A 1), deicing fluids and motor oils. Temperature range -30° up to +90° Celsius. Electrical resistance between 10³ and 106 Ohm.

DN 38 to DN 100

'Yellow Band' aircraft refuelling hoses, suitable for all aviation gasolines and jet fuels (JET A 1), deicing fluids and motor oils. Temperature range -30° up to +90° Celsius. Electrical resistance between 10³ and 106 Ohm.

Additional Info

22

0

Type PHD-F
PHD-F
Type PHD-F

Aviation Refuelling Hose (with plastic helix)

'Yellow Band' aircraft refuelling hoses, suitable for all aviation gasolines and jet fuels (JET A 1), deicing fluids and motor oils. Temperature range -30° up to +90° Celsius. Electrical resistance between 10³ and 106 Ohm.

DN 38 to DN 75

'Yellow Band' aircraft refuelling hoses, suitable for all aviation gasolines and jet fuels (JET A 1), deicing fluids and motor oils. Temperature range -30° up to +90° Celsius. Electrical resistance between 10³ and 106 Ohm.

Additional Info

23

0

Type TW-E
TW-E
Type TW-E

Aviation Refuelling Hose (with steel helix)

'Yellow Band' aircraft refuelling hoses, suitable for all aviation gasolines and jet fuels (JET A 1), deicing fluids and motor oils. Temperature range -30° up to +90° Celsius. Electrical resistance between 10³ and 106 Ohm.

DN 25 to DN 100

'Yellow Band' aircraft refuelling hoses, suitable for all aviation gasolines and jet fuels (JET A 1), deicing fluids and motor oils. Temperature range -30° up to +90° Celsius. Electrical resistance between 10³ and 106 Ohm.

Additional Info

24

0

Type Slimline 'SL'
Slimline SL
Type Slimline 'SL'

Petrol Pump Hoses
black or coloured

SLIMLINE quality petrol pump hoses for gasoline and diesel fuels. Also suitable for fuels with ethanol content up to E 85 and Biodiesel up to B30 (BIO Type up to B100).
Meets weights and measures regulations, see page 111b.
Cold flexible down to -30° C/-22° F (LT-type down to -40° C/-40° F).

Correspond to EN 1360, respectively EN 13483.

DN 16 to DN 21

SLIMLINE quality petrol pump hoses for gasoline and diesel fuels. Also suitable for fuels with ethanol content up to E 85 and Biodiesel up to B30 (BIO Type up to B100).
Meets weights and measures regulations, see page 111b.
Cold flexible down to -30° C/-22° F (LT-type down to -40° C/-40° F).

Correspond to EN 1360, respectively EN 13483.

Additional Info

25

0

Type Slimline 'SL LT'
Slimline SL LT
Type Slimline 'SL LT'

Petrol Pump Hoses
Low Temperature, black or coloured

Type Slimline 'SL LT': Special low temperature type for use in cold climate regions. Good flexibility down to -40° Celsius.

Type SL 25 LT: Suitable for cold and warm regions. Good flexibility down to -40° Celsius.

SLIMLINE quality petrol pump hoses for gasoline and diesel fuels. Also suitable for fuels with ethanol content up to E 85 and Biodiesel up to B30 (BIO Type up to B100).
Meets weights and measures regulations, see overleaf.

Correspond to EN 1360, respectively EN 13483.

DN 16 to DN 25

Type Slimline 'SL LT': Special low temperature type for use in cold climate regions. Good flexibility down to -40° Celsius.

Type SL 25 LT: Suitable for cold and warm regions. Good flexibility down to -40° Celsius.

SLIMLINE quality petrol pump hoses for gasoline and diesel fuels. Also suitable for fuels with ethanol content up to E 85 and Biodiesel up to B30 (BIO Type up to B100).
Meets weights and measures regulations, see overleaf.

Correspond to EN 1360, respectively EN 13483.

Additional Info

26

0

Type Slimline 'BIO'
Slimline BIO
Type Slimline 'BIO'

Petrol Pump Hoses,
for gasoline and diesel fuels, black or coloured

Type 'SL BIO': Special type for Biodiesel (HVO) up to B 100 to EN 14214. Also suitable for Diesel.
Meets weights and measures regulations, see overleaf. Cold flexible down to -30° C/-22° F (LT-type down to -40° C/-40° F).

Correspond to EN 1360, respectively EN 13483.

DN 16 to DN 25

Type 'SL BIO': Special type for Biodiesel (HVO) up to B 100 to EN 14214. Also suitable for Diesel.
Meets weights and measures regulations, see overleaf. Cold flexible down to -30° C/-22° F (LT-type down to -40° C/-40° F).

Correspond to EN 1360, respectively EN 13483.

Additional Info

27

0

Type COAX
COAX
Type COAX

COAX hose assemblies for DN 21/8 NR for dispensers with active vapour recovery, black or coloured

PETROL PUMP HOSE (outside)
TYPE SL 21: Quality petrol pump hose 'CONTI-SLIMLINE' DN 21-PN 16, OD , 31 mm, smooth surface, suitable for retraction devices up to min. ø 150 mm.
Lining: NBR, electrically dissipative. Two textile reinforcements with interwoven conductivity strands.
Cover: chlorinated synthetic rubber, resistant to light cracks.
Available in black or coloured (blue, green, red, yellow) with smooth, colour stable surface. With continuous and permanent laser marking. Meet all requirements of EN 13483 (EN 1360). Also suitable for fuels with ethanol content up to E 85.

HOSE COUPLINGS (factory assembled)
Non-reusable safety couplings DN 21-PN 16 aluminium, swivel nut with standard
thread M 34 x 1,5 of stainless steel, o-rings of Viton (FKM).
Nozzle side: easy rotating swivel, with spiral spring supported lip seal ED 077 of LT
(Low Temperature) flexible polyurethane (see Info 1.07). With 2 key faces width 41 mm.
Pump side: swivel with six key faces width 36 mm and with O-ring EO 171 Vi.

ANTI-KINKING SLEEVE
On nozzle side anti-kinking sleeve KS 21 of low temperataure flexible polyurethane.
With degassing holes. Non-reusable.

COLOUR SLEEVE
Short sleeve CS 21 with stable colours for grade identification or company colours.
Made of polyurethane with smooth glossy surface in all known company colours.
Retrofitting and disassembly are possible (see page GR 13).

VAPOUR HOSE (inside)
Vapour recovery hose DN 8 / PN 16 (OD ø 12 mm) of polyurethane (LT flexible).
Resistant to petrol and ozone, low diffusion. Remains stable also with narrow bending
radii, because of the steel reinforcements. With vapour hose tail DN 8 of PVDF black,
with non reusable stainless steel clamps.
Nozzle side with arresting device through locked vapour hose tail.
Pump side swivel supported to avoid twisting through torsion.

COMFORMITY TO WEIGHTS AND MEASURES / ELONGATION
According to EN 13483 the volume increase of a new hose assembly is not allowed to be more than 2 % of the hose contents at 3 bar. 'CONTI-SLIMLINE' hoses meet this standard with sufficient safety tolerance due to their low-tensile textile reinforcements. According to the standard the elongation of the hose through swelling is allowed to be max. 4 %. During service with petrol 'CONTI-SLIMLINE' hoses elongate as follows: with leaded super petrol about 1 to 1,5 %, with unleaded super petrol about 1,5 to 2 %.

PERMEABILITY
According to EN 13483 the loss of petrol in a hose assembly is not allowed to be higher than 12 ml / m per day when using Liquid C. 'CONTI-SLIMLINE' hoses meet this standard.

LOW TEMPERATURE BENDING FORCE
The EN 13483 specifies that a new petrol pump hose must not require a higher bending force than 180 N when bending the hose at -30° C in a normed device with a radius of 75 mm at an 90° angle. 'CONTI-SLIMLINE' hoses DN 21 only require 70 to 100 N and meet the even higher requirements of the MPD manufacturers. For the operation in particularly cold regions (e.g. Scandinavia) we supply the LT type (Low Temperature), with a good retractability up to -40° C, dependent on the construction of the retraction device. It meets all requirements of the Low Temperature Type as described in EN 13483.

DN 21

PETROL PUMP HOSE (outside)
TYPE SL 21: Quality petrol pump hose 'CONTI-SLIMLINE' DN 21-PN 16, OD , 31 mm, smooth surface, suitable for retraction devices up to min. ø 150 mm.
Lining: NBR, electrically dissipative. Two textile reinforcements with interwoven conductivity strands.
Cover: chlorinated synthetic rubber, resistant to light cracks.
Available in black or coloured (blue, green, red, yellow) with smooth, colour stable surface. With continuous and permanent laser marking. Meet all requirements of EN 13483 (EN 1360). Also suitable for fuels with ethanol content up to E 85.

HOSE COUPLINGS (factory assembled)
Non-reusable safety couplings DN 21-PN 16 aluminium, swivel nut with standard
thread M 34 x 1,5 of stainless steel, o-rings of Viton (FKM).
Nozzle side: easy rotating swivel, with spiral spring supported lip seal ED 077 of LT
(Low Temperature) flexible polyurethane (see Info 1.07). With 2 key faces width 41 mm.
Pump side: swivel with six key faces width 36 mm and with O-ring EO 171 Vi.

ANTI-KINKING SLEEVE
On nozzle side anti-kinking sleeve KS 21 of low temperataure flexible polyurethane.
With degassing holes. Non-reusable.

COLOUR SLEEVE
Short sleeve CS 21 with stable colours for grade identification or company colours.
Made of polyurethane with smooth glossy surface in all known company colours.
Retrofitting and disassembly are possible (see page GR 13).

VAPOUR HOSE (inside)
Vapour recovery hose DN 8 / PN 16 (OD ø 12 mm) of polyurethane (LT flexible).
Resistant to petrol and ozone, low diffusion. Remains stable also with narrow bending
radii, because of the steel reinforcements. With vapour hose tail DN 8 of PVDF black,
with non reusable stainless steel clamps.
Nozzle side with arresting device through locked vapour hose tail.
Pump side swivel supported to avoid twisting through torsion.

COMFORMITY TO WEIGHTS AND MEASURES / ELONGATION
According to EN 13483 the volume increase of a new hose assembly is not allowed to be more than 2 % of the hose contents at 3 bar. 'CONTI-SLIMLINE' hoses meet this standard with sufficient safety tolerance due to their low-tensile textile reinforcements. According to the standard the elongation of the hose through swelling is allowed to be max. 4 %. During service with petrol 'CONTI-SLIMLINE' hoses elongate as follows: with leaded super petrol about 1 to 1,5 %, with unleaded super petrol about 1,5 to 2 %.

PERMEABILITY
According to EN 13483 the loss of petrol in a hose assembly is not allowed to be higher than 12 ml / m per day when using Liquid C. 'CONTI-SLIMLINE' hoses meet this standard.

LOW TEMPERATURE BENDING FORCE
The EN 13483 specifies that a new petrol pump hose must not require a higher bending force than 180 N when bending the hose at -30° C in a normed device with a radius of 75 mm at an 90° angle. 'CONTI-SLIMLINE' hoses DN 21 only require 70 to 100 N and meet the even higher requirements of the MPD manufacturers. For the operation in particularly cold regions (e.g. Scandinavia) we supply the LT type (Low Temperature), with a good retractability up to -40° C, dependent on the construction of the retraction device. It meets all requirements of the Low Temperature Type as described in EN 13483.

Additional Info

28

0

Type COAX LT
COAX LT
Type COAX LT

COAX hose assemblies for DN 21/8 NR for dispensers with active vapour recovery, Low Temperature, black or coloured

PETROL PUMP HOSE (outside)
TYPE SL 21: Quality petrol pump hose 'CONTI-SLIMLINE' DN 21-PN 16, OD , 31 mm, smooth surface, suitable for retraction devices up to min. ø 150 mm.
Lining: NBR, electrically dissipative. Two textile reinforcements with interwoven conductivity strands.
Cover: chlorinated synthetic rubber, resistant to light cracks.
Available in black or coloured (blue, green, red, yellow) with smooth, colour stable surface. With continuous and permanent laser marking. Meet all requirements of EN 13483 (EN 1360). Also suitable for fuels with ethanol content up to E 85.

HOSE COUPLINGS (factory assembled)
Non-reusable safety couplings DN 21-PN 16 aluminium, swivel nut with standard
thread M 34 x 1,5 of stainless steel, o-rings of Viton (FKM).
Nozzle side: easy rotating swivel, with spiral spring supported lip seal ED 077 of LT
(Low Temperature) flexible polyurethane (see Info 1.07). With 2 key faces width 41 mm.
Pump side: swivel with six key faces width 36 mm and with O-ring EO 171 Vi.

ANTI-KINKING SLEEVE
On nozzle side anti-kinking sleeve KS 21 of low temperataure flexible polyurethane.
With degassing holes. Non-reusable.

COLOUR SLEEVE
Short sleeve CS 21 with stable colours for grade identification or company colours.
Made of polyurethane with smooth glossy surface in all known company colours.
Retrofitting and disassembly are possible (see page GR 13).

VAPOUR HOSE (inside)
Vapour recovery hose DN 8 / PN 16 (OD ø 12 mm) of polyurethane (LT flexible).
Resistant to petrol and ozone, low diffusion. Remains stable also with narrow bending
radii, because of the steel reinforcements. With vapour hose tail DN 8 of PVDF black,
with non reusable stainless steel clamps.
Nozzle side with arresting device through locked vapour hose tail.
Pump side swivel supported to avoid twisting through torsion.

COMFORMITY TO WEIGHTS AND MEASURES / ELONGATION
According to EN 13483 the volume increase of a new hose assembly is not allowed to be more than 2 % of the hose contents at 3 bar. 'CONTI-SLIMLINE' hoses meet this standard with sufficient safety tolerance due to their low-tensile textile reinforcements. According to the standard the elongation of the hose through swelling is allowed to be max. 4 %. During service with petrol 'CONTI-SLIMLINE' hoses elongate as follows: with leaded super petrol about 1 to 1,5 %, with unleaded super petrol about 1,5 to 2 %.

PERMEABILITY
According to EN 13483 the loss of petrol in a hose assembly is not allowed to be higher than 12 ml / m per day when using Liquid C. 'CONTI-SLIMLINE' hoses meet this standard.

LOW TEMPERATURE BENDING FORCE
The EN 13483 specifies that a new petrol pump hose must not require a higher bending force than 180 N when bending the hose at -30° C in a normed device with a radius of 75 mm at an 90° angle. 'CONTI-SLIMLINE' hoses DN 21 only require 70 to 100 N and meet the even higher requirements of the MPD manufacturers. For the operation in particularly cold regions (e.g. Scandinavia) we supply the LT type (Low Temperature), with a good retractability up to -40° C, dependent on the construction of the retraction device. It meets all requirements of the Low Temperature Type as described in EN 13483.

DN 21

PETROL PUMP HOSE (outside)
TYPE SL 21: Quality petrol pump hose 'CONTI-SLIMLINE' DN 21-PN 16, OD , 31 mm, smooth surface, suitable for retraction devices up to min. ø 150 mm.
Lining: NBR, electrically dissipative. Two textile reinforcements with interwoven conductivity strands.
Cover: chlorinated synthetic rubber, resistant to light cracks.
Available in black or coloured (blue, green, red, yellow) with smooth, colour stable surface. With continuous and permanent laser marking. Meet all requirements of EN 13483 (EN 1360). Also suitable for fuels with ethanol content up to E 85.

HOSE COUPLINGS (factory assembled)
Non-reusable safety couplings DN 21-PN 16 aluminium, swivel nut with standard
thread M 34 x 1,5 of stainless steel, o-rings of Viton (FKM).
Nozzle side: easy rotating swivel, with spiral spring supported lip seal ED 077 of LT
(Low Temperature) flexible polyurethane (see Info 1.07). With 2 key faces width 41 mm.
Pump side: swivel with six key faces width 36 mm and with O-ring EO 171 Vi.

ANTI-KINKING SLEEVE
On nozzle side anti-kinking sleeve KS 21 of low temperataure flexible polyurethane.
With degassing holes. Non-reusable.

COLOUR SLEEVE
Short sleeve CS 21 with stable colours for grade identification or company colours.
Made of polyurethane with smooth glossy surface in all known company colours.
Retrofitting and disassembly are possible (see page GR 13).

VAPOUR HOSE (inside)
Vapour recovery hose DN 8 / PN 16 (OD ø 12 mm) of polyurethane (LT flexible).
Resistant to petrol and ozone, low diffusion. Remains stable also with narrow bending
radii, because of the steel reinforcements. With vapour hose tail DN 8 of PVDF black,
with non reusable stainless steel clamps.
Nozzle side with arresting device through locked vapour hose tail.
Pump side swivel supported to avoid twisting through torsion.

COMFORMITY TO WEIGHTS AND MEASURES / ELONGATION
According to EN 13483 the volume increase of a new hose assembly is not allowed to be more than 2 % of the hose contents at 3 bar. 'CONTI-SLIMLINE' hoses meet this standard with sufficient safety tolerance due to their low-tensile textile reinforcements. According to the standard the elongation of the hose through swelling is allowed to be max. 4 %. During service with petrol 'CONTI-SLIMLINE' hoses elongate as follows: with leaded super petrol about 1 to 1,5 %, with unleaded super petrol about 1,5 to 2 %.

PERMEABILITY
According to EN 13483 the loss of petrol in a hose assembly is not allowed to be higher than 12 ml / m per day when using Liquid C. 'CONTI-SLIMLINE' hoses meet this standard.

LOW TEMPERATURE BENDING FORCE
The EN 13483 specifies that a new petrol pump hose must not require a higher bending force than 180 N when bending the hose at -30° C in a normed device with a radius of 75 mm at an 90° angle. 'CONTI-SLIMLINE' hoses DN 21 only require 70 to 100 N and meet the even higher requirements of the MPD manufacturers. For the operation in particularly cold regions (e.g. Scandinavia) we supply the LT type (Low Temperature), with a good retractability up to -40° C, dependent on the construction of the retraction device. It meets all requirements of the Low Temperature Type as described in EN 13483.

Additional Info

30

0

Type Slimline 'SL SF'
Slimline 'SL SF'
Type Slimline 'SL SF'

Petrol Pump Hoses
Sulpur Free, black or coloured

Quality petrol pump hoses SLIMLINE SF, sulphur-free special type. Suitable for gasoline and diesel fuels, also with ethanol content up to E 85 and Biodiesel up to B 30. Meets weights and measures regulations, see page 111b. Cold flexible down to -30° C / -22° F (LT-type down to -40° C / -40° F).Correspond to EN 1360 and EN 13483.

DN 16 to DN 21

Quality petrol pump hoses SLIMLINE SF, sulphur-free special type. Suitable for gasoline and diesel fuels, also with ethanol content up to E 85 and Biodiesel up to B 30. Meets weights and measures regulations, see page 111b. Cold flexible down to -30° C / -22° F (LT-type down to -40° C / -40° F).Correspond to EN 1360 and EN 13483.

Additional Info

31

0

Type Slimline 'SL SF LT'
Slimline 'SL SF LT'
Type Slimline 'SL SF LT'

Petrol Pump Hoses
Low Temperature, Sulphur Free, black or coloured

Type Slimline 'SF LT': Special low temperature and sulphur-free type for use in cold climate regions. Good flexibility down to -40° Celsius.

DN 16 to DN 21

Type Slimline 'SF LT': Special low temperature and sulphur-free type for use in cold climate regions. Good flexibility down to -40° Celsius.

Additional Info

32

0

Type COAX SF
COAX SF
Type COAX SF

COAX hose assemblies for DN 21/8 NR for dispensers with active vapour recovery, Sulpur Free, black or coloured

PETROL PUMP HOSE (outside)
TYPE SL 21: Quality petrol pump hose 'CONTI-SLIMLINE' DN 21-PN 16, OD , 31 mm, smooth surface, suitable for retraction devices up to min. ø 150 mm.
Lining: NBR, electrically dissipative. Two textile reinforcements with interwoven conductivity strands.
Cover: chlorinated synthetic rubber, resistant to light cracks.
Available in black or coloured (blue, green, red, yellow) with smooth, colour stable surface. With continuous and permanent laser marking. Meet all requirements of EN 13483 (EN 1360). Also suitable for fuels with ethanol content up to E 85.

HOSE COUPLINGS (factory assembled)
Non-reusable safety couplings DN 21-PN 16 aluminium, swivel nut with standard
thread M 34 x 1,5 of stainless steel, o-rings of Viton (FKM).
Nozzle side: easy rotating swivel, with spiral spring supported lip seal ED 077 of LT
(Low Temperature) flexible polyurethane (see Info 1.07). With 2 key faces width 41 mm.
Pump side: swivel with six key faces width 36 mm and with O-ring EO 171 Vi.

ANTI-KINKING SLEEVE
On nozzle side anti-kinking sleeve KS 21 of low temperataure flexible polyurethane.
With degassing holes. Non-reusable.

COLOUR SLEEVE
Short sleeve CS 21 with stable colours for grade identification or company colours.
Made of polyurethane with smooth glossy surface in all known company colours.
Retrofitting and disassembly are possible (see page GR 13).

VAPOUR HOSE (inside)
Vapour recovery hose DN 8 / PN 16 (OD ø 12 mm) of polyurethane (LT flexible).
Resistant to petrol and ozone, low diffusion. Remains stable also with narrow bending
radii, because of the steel reinforcements. With vapour hose tail DN 8 of PVDF black,
with non reusable stainless steel clamps.
Nozzle side with arresting device through locked vapour hose tail.
Pump side swivel supported to avoid twisting through torsion.

COMFORMITY TO WEIGHTS AND MEASURES / ELONGATION
According to EN 13483 the volume increase of a new hose assembly is not allowed to be more than 2 % of the hose contents at 3 bar. 'CONTI-SLIMLINE' hoses meet this standard with sufficient safety tolerance due to their low-tensile textile reinforcements. According to the standard the elongation of the hose through swelling is allowed to be max. 4 %. During service with petrol 'CONTI-SLIMLINE' hoses elongate as follows: with leaded super petrol about 1 to 1,5 %, with unleaded super petrol about 1,5 to 2 %.

PERMEABILITY
According to EN 13483 the loss of petrol in a hose assembly is not allowed to be higher than 12 ml / m per day when using Liquid C. 'CONTI-SLIMLINE' hoses meet this standard.

LOW TEMPERATURE BENDING FORCE
The EN 13483 specifies that a new petrol pump hose must not require a higher bending force than 180 N when bending the hose at -30° C in a normed device with a radius of 75 mm at an 90° angle. 'CONTI-SLIMLINE' hoses DN 21 only require 70 to 100 N and meet the even higher requirements of the MPD manufacturers. For the operation in particularly cold regions (e.g. Scandinavia) we supply the LT type (Low Temperature), with a good retractability up to -40° C, dependent on the construction of the retraction device. It meets all requirements of the Low Temperature Type as described in EN 13483.

DN 21

PETROL PUMP HOSE (outside)
TYPE SL 21: Quality petrol pump hose 'CONTI-SLIMLINE' DN 21-PN 16, OD , 31 mm, smooth surface, suitable for retraction devices up to min. ø 150 mm.
Lining: NBR, electrically dissipative. Two textile reinforcements with interwoven conductivity strands.
Cover: chlorinated synthetic rubber, resistant to light cracks.
Available in black or coloured (blue, green, red, yellow) with smooth, colour stable surface. With continuous and permanent laser marking. Meet all requirements of EN 13483 (EN 1360). Also suitable for fuels with ethanol content up to E 85.

HOSE COUPLINGS (factory assembled)
Non-reusable safety couplings DN 21-PN 16 aluminium, swivel nut with standard
thread M 34 x 1,5 of stainless steel, o-rings of Viton (FKM).
Nozzle side: easy rotating swivel, with spiral spring supported lip seal ED 077 of LT
(Low Temperature) flexible polyurethane (see Info 1.07). With 2 key faces width 41 mm.
Pump side: swivel with six key faces width 36 mm and with O-ring EO 171 Vi.

ANTI-KINKING SLEEVE
On nozzle side anti-kinking sleeve KS 21 of low temperataure flexible polyurethane.
With degassing holes. Non-reusable.

COLOUR SLEEVE
Short sleeve CS 21 with stable colours for grade identification or company colours.
Made of polyurethane with smooth glossy surface in all known company colours.
Retrofitting and disassembly are possible (see page GR 13).

VAPOUR HOSE (inside)
Vapour recovery hose DN 8 / PN 16 (OD ø 12 mm) of polyurethane (LT flexible).
Resistant to petrol and ozone, low diffusion. Remains stable also with narrow bending
radii, because of the steel reinforcements. With vapour hose tail DN 8 of PVDF black,
with non reusable stainless steel clamps.
Nozzle side with arresting device through locked vapour hose tail.
Pump side swivel supported to avoid twisting through torsion.

COMFORMITY TO WEIGHTS AND MEASURES / ELONGATION
According to EN 13483 the volume increase of a new hose assembly is not allowed to be more than 2 % of the hose contents at 3 bar. 'CONTI-SLIMLINE' hoses meet this standard with sufficient safety tolerance due to their low-tensile textile reinforcements. According to the standard the elongation of the hose through swelling is allowed to be max. 4 %. During service with petrol 'CONTI-SLIMLINE' hoses elongate as follows: with leaded super petrol about 1 to 1,5 %, with unleaded super petrol about 1,5 to 2 %.

PERMEABILITY
According to EN 13483 the loss of petrol in a hose assembly is not allowed to be higher than 12 ml / m per day when using Liquid C. 'CONTI-SLIMLINE' hoses meet this standard.

LOW TEMPERATURE BENDING FORCE
The EN 13483 specifies that a new petrol pump hose must not require a higher bending force than 180 N when bending the hose at -30° C in a normed device with a radius of 75 mm at an 90° angle. 'CONTI-SLIMLINE' hoses DN 21 only require 70 to 100 N and meet the even higher requirements of the MPD manufacturers. For the operation in particularly cold regions (e.g. Scandinavia) we supply the LT type (Low Temperature), with a good retractability up to -40° C, dependent on the construction of the retraction device. It meets all requirements of the Low Temperature Type as described in EN 13483.

Additional Info

33

0

Type COAX SF LT
COAX SF LT
Type COAX SF LT

COAX hose assemblies for DN 21/8 NR for dispensers with active vapour recovery, Low Temperature, Sulphur Free, black or coloured

PETROL PUMP HOSE (outside)
TYPE SL 21: Quality petrol pump hose 'CONTI-SLIMLINE' DN 21-PN 16, OD , 31 mm, smooth surface, suitable for retraction devices up to min. ø 150 mm.
Lining: NBR, electrically dissipative. Two textile reinforcements with interwoven conductivity strands.
Cover: chlorinated synthetic rubber, resistant to light cracks.
Available in black or coloured (blue, green, red, yellow) with smooth, colour stable surface. With continuous and permanent laser marking. Meet all requirements of EN 13483 (EN 1360). Also suitable for fuels with ethanol content up to E 85.

HOSE COUPLINGS (factory assembled)
Non-reusable safety couplings DN 21-PN 16 aluminium, swivel nut with standard
thread M 34 x 1,5 of stainless steel, o-rings of Viton (FKM).
Nozzle side: easy rotating swivel, with spiral spring supported lip seal ED 077 of LT
(Low Temperature) flexible polyurethane (see Info 1.07). With 2 key faces width 41 mm.
Pump side: swivel with six key faces width 36 mm and with O-ring EO 171 Vi.

ANTI-KINKING SLEEVE
On nozzle side anti-kinking sleeve KS 21 of low temperataure flexible polyurethane.
With degassing holes. Non-reusable.

COLOUR SLEEVE
Short sleeve CS 21 with stable colours for grade identification or company colours.
Made of polyurethane with smooth glossy surface in all known company colours.
Retrofitting and disassembly are possible (see page GR 13).

VAPOUR HOSE (inside)
Vapour recovery hose DN 8 / PN 16 (OD ø 12 mm) of polyurethane (LT flexible).
Resistant to petrol and ozone, low diffusion. Remains stable also with narrow bending
radii, because of the steel reinforcements. With vapour hose tail DN 8 of PVDF black,
with non reusable stainless steel clamps.
Nozzle side with arresting device through locked vapour hose tail.
Pump side swivel supported to avoid twisting through torsion.

COMFORMITY TO WEIGHTS AND MEASURES / ELONGATION
According to EN 13483 the volume increase of a new hose assembly is not allowed to be more than 2 % of the hose contents at 3 bar. 'CONTI-SLIMLINE' hoses meet this standard with sufficient safety tolerance due to their low-tensile textile reinforcements. According to the standard the elongation of the hose through swelling is allowed to be max. 4 %. During service with petrol 'CONTI-SLIMLINE' hoses elongate as follows: with leaded super petrol about 1 to 1,5 %, with unleaded super petrol about 1,5 to 2 %.

PERMEABILITY
According to EN 13483 the loss of petrol in a hose assembly is not allowed to be higher than 12 ml / m per day when using Liquid C. 'CONTI-SLIMLINE' hoses meet this standard.

LOW TEMPERATURE BENDING FORCE
The EN 13483 specifies that a new petrol pump hose must not require a higher bending force than 180 N when bending the hose at -30° C in a normed device with a radius of 75 mm at an 90° angle. 'CONTI-SLIMLINE' hoses DN 21 only require 70 to 100 N and meet the even higher requirements of the MPD manufacturers. For the operation in particularly cold regions (e.g. Scandinavia) we supply the LT type (Low Temperature), with a good retractability up to -40° C, dependent on the construction of the retraction device. It meets all requirements of the Low Temperature Type as described in EN 13483.

DN 21

PETROL PUMP HOSE (outside)
TYPE SL 21: Quality petrol pump hose 'CONTI-SLIMLINE' DN 21-PN 16, OD , 31 mm, smooth surface, suitable for retraction devices up to min. ø 150 mm.
Lining: NBR, electrically dissipative. Two textile reinforcements with interwoven conductivity strands.
Cover: chlorinated synthetic rubber, resistant to light cracks.
Available in black or coloured (blue, green, red, yellow) with smooth, colour stable surface. With continuous and permanent laser marking. Meet all requirements of EN 13483 (EN 1360). Also suitable for fuels with ethanol content up to E 85.

HOSE COUPLINGS (factory assembled)
Non-reusable safety couplings DN 21-PN 16 aluminium, swivel nut with standard
thread M 34 x 1,5 of stainless steel, o-rings of Viton (FKM).
Nozzle side: easy rotating swivel, with spiral spring supported lip seal ED 077 of LT
(Low Temperature) flexible polyurethane (see Info 1.07). With 2 key faces width 41 mm.
Pump side: swivel with six key faces width 36 mm and with O-ring EO 171 Vi.

ANTI-KINKING SLEEVE
On nozzle side anti-kinking sleeve KS 21 of low temperataure flexible polyurethane.
With degassing holes. Non-reusable.

COLOUR SLEEVE
Short sleeve CS 21 with stable colours for grade identification or company colours.
Made of polyurethane with smooth glossy surface in all known company colours.
Retrofitting and disassembly are possible (see page GR 13).

VAPOUR HOSE (inside)
Vapour recovery hose DN 8 / PN 16 (OD ø 12 mm) of polyurethane (LT flexible).
Resistant to petrol and ozone, low diffusion. Remains stable also with narrow bending
radii, because of the steel reinforcements. With vapour hose tail DN 8 of PVDF black,
with non reusable stainless steel clamps.
Nozzle side with arresting device through locked vapour hose tail.
Pump side swivel supported to avoid twisting through torsion.

COMFORMITY TO WEIGHTS AND MEASURES / ELONGATION
According to EN 13483 the volume increase of a new hose assembly is not allowed to be more than 2 % of the hose contents at 3 bar. 'CONTI-SLIMLINE' hoses meet this standard with sufficient safety tolerance due to their low-tensile textile reinforcements. According to the standard the elongation of the hose through swelling is allowed to be max. 4 %. During service with petrol 'CONTI-SLIMLINE' hoses elongate as follows: with leaded super petrol about 1 to 1,5 %, with unleaded super petrol about 1,5 to 2 %.

PERMEABILITY
According to EN 13483 the loss of petrol in a hose assembly is not allowed to be higher than 12 ml / m per day when using Liquid C. 'CONTI-SLIMLINE' hoses meet this standard.

LOW TEMPERATURE BENDING FORCE
The EN 13483 specifies that a new petrol pump hose must not require a higher bending force than 180 N when bending the hose at -30° C in a normed device with a radius of 75 mm at an 90° angle. 'CONTI-SLIMLINE' hoses DN 21 only require 70 to 100 N and meet the even higher requirements of the MPD manufacturers. For the operation in particularly cold regions (e.g. Scandinavia) we supply the LT type (Low Temperature), with a good retractability up to -40° C, dependent on the construction of the retraction device. It meets all requirements of the Low Temperature Type as described in EN 13483.

Additional Info

34

0

Type Slimline 16 AdBlue
Slimline 16 AdBlue
Type Slimline 16 AdBlue

Hose for AdBlue® (DEF/AUS 32/ARLA 32) urea solution, black or blue.

Quality dispensing hoses SLIMLINE 16 AdBlue for urea solution.
Correspond to EN 1360.Dispensing hose DN 16 for the refilling of light and heavy vehicles with AdBlue® (AUS 32, DEF, ARLA 32) urea solution to ISO 22241.
The highly flexible hose is well suitable for MPD hose retraction systems and allows small bending radii and a good handling.
In combination with the appropriate stainless steel hose couplings (pages 203/205), the plasticiser-free and leaching-resistant lining guarantees constant purity of the dispensed urea solution.

DN 16

Quality dispensing hoses SLIMLINE 16 AdBlue for urea solution.
Correspond to EN 1360.Dispensing hose DN 16 for the refilling of light and heavy vehicles with AdBlue® (AUS 32, DEF, ARLA 32) urea solution to ISO 22241.
The highly flexible hose is well suitable for MPD hose retraction systems and allows small bending radii and a good handling.
In combination with the appropriate stainless steel hose couplings (pages 203/205), the plasticiser-free and leaching-resistant lining guarantees constant purity of the dispensed urea solution.

Additional Info

35

0

Type EFL 16
EFL 16
Type EFL 16

Universal Pump Hose

FLUORLINE universal pump hose for chemicals, petroleum based products, for propane, butane and other L.P. gases, as well as solvents as per resistance chart.

Ideal for highly sensitive media such as AdBlue® urea solution (DEF, ARLA 32, AUS 32). Resistant against all common cleaning agents. Temperature range -40° to +100° C. Burst pressure >64 bar.

DN 16

FLUORLINE universal pump hose for chemicals, petroleum based products, for propane, butane and other L.P. gases, as well as solvents as per resistance chart.

Ideal for highly sensitive media such as AdBlue® urea solution (DEF, ARLA 32, AUS 32). Resistant against all common cleaning agents. Temperature range -40° to +100° C. Burst pressure >64 bar.

Additional Info

36

0

Type EFL 21
EFL 21
Type EFL 21

Universal Pump Hose

FLUORLINE universal pump hose for chemicals, petroleum based products, for propane, butane and other L.P. gases, as well as solvents as per resistance chart.

Ideal for highly sensitive media such as AdBlue® urea solution (DEF, ARLA 32, AUS 32). Resistant against all common cleaning agents. Temperature range -40° to +100° C. Burst pressure >64 bar.

DN 21

FLUORLINE universal pump hose for chemicals, petroleum based products, for propane, butane and other L.P. gases, as well as solvents as per resistance chart.

Ideal for highly sensitive media such as AdBlue® urea solution (DEF, ARLA 32, AUS 32). Resistant against all common cleaning agents. Temperature range -40° to +100° C. Burst pressure >64 bar.

Additional Info

37

0

Type LPG
LPG
Type LPG

Liquid Petroleum Gas Hose

'Orange Band' Liquefied Petroleum Gas hose to EN 1762.
For propane, butane and their mixtures to EN 589. As the hose lining is resistant to diffusion the hose is also suitable for natural gas.
Use with propene (propylene) possible - pricking required. Not suitable for ammonia. Rugged and long-lasting construction with low tensile braids.
Burst pressure >100 bar. Temperature range -40° C up to +70° C (Special type LPG-LT does not crack down to -50° C).
Approved by DVGW, approval No. DG-4621 AU 0049.

DN 10 to DN 200

'Orange Band' Liquefied Petroleum Gas hose to EN 1762.
For propane, butane and their mixtures to EN 589. As the hose lining is resistant to diffusion the hose is also suitable for natural gas.
Use with propene (propylene) possible - pricking required. Not suitable for ammonia. Rugged and long-lasting construction with low tensile braids.
Burst pressure >100 bar. Temperature range -40° C up to +70° C (Special type LPG-LT does not crack down to -50° C).
Approved by DVGW, approval No. DG-4621 AU 0049.

Additional Info

38

0

Type LPG 16
LPG 16
Type LPG 16

Hose for L.P. Gas Dispensers
black or orange.

Hoses for L.P. Gas dispensers. Meet EN 1762 standard.
For propane, butane and their mixtures to EN 589. Highly flexible and long-lasting construction.
Burst pressure >100 bar. Temperature range -40° C up to +70° C.
DVGW and AS 1869 approved.

DN 16

Hoses for L.P. Gas dispensers. Meet EN 1762 standard.
For propane, butane and their mixtures to EN 589. Highly flexible and long-lasting construction.
Burst pressure >100 bar. Temperature range -40° C up to +70° C.
DVGW and AS 1869 approved.

Additional Info

39

0

Type LPG 16 S
LPG 16 S
Type LPG 16 S

Standard hose for L.P. Gas Dispensers
black or orange.

Hoses for L.P. Gas dispensers. Meet EN 1762 standard.
For propane, butane and their mixtures. Highly flexible and long-lasting construction.
Burst pressure >100 bar. Temperature range -30° C up to +70° C.
DVGW and AS 1869 approved.

DN 16

Hoses for L.P. Gas dispensers. Meet EN 1762 standard.
For propane, butane and their mixtures. Highly flexible and long-lasting construction.
Burst pressure >100 bar. Temperature range -30° C up to +70° C.
DVGW and AS 1869 approved.

Additional Info

40

0

Type CHD / CHS
CHD / CHS
Type CHD / CHS

Chemical Hose (without / with steel helix)

'Lilac Band' multi purpose hose for chemicals, acids (except for concentr. oxidising acids), alkalis, salt solutions, alcohols, polar solvents, acetates, aldehydes, ester, ketones, hot cooling water, hot air, not oily.
Temperature range -40° up to +100° C (depending on medium). Open steam cleaning up to +150° C / max. 30 min.Not suitable for aliphatic, aromatic and halogenated hydrocarbons, fuels, chlorine, chloride, ether, tar oils and oxidising acids.

DN 13 to DN 150

'Lilac Band' multi purpose hose for chemicals, acids (except for concentr. oxidising acids), alkalis, salt solutions, alcohols, polar solvents, acetates, aldehydes, ester, ketones, hot cooling water, hot air, not oily.
Temperature range -40° up to +100° C (depending on medium). Open steam cleaning up to +150° C / max. 30 min.Not suitable for aliphatic, aromatic and halogenated hydrocarbons, fuels, chlorine, chloride, ether, tar oils and oxidising acids.

Additional Info

41

0

Type CHD
CHD
Type CHD

Chemical Hose for pressure only (without helix)

'Lilac Band' multi purpose hose for chemicals, acids (except for concentr. oxidising acids), alkalis, salt solutions, alcohols, polar solvents, acetates, aldehydes, ester, ketones, hot cooling water, hot air, not oily.
Temperature range -40° up to +100° C (depending on medium). Open steam cleaning up to +150° C / max. 30 min.
Not suitable for aliphatic, aromatic and halogenated hydrocarbons, fuels, chlorine, chloride, ether, tar oils and oxidising acids.

DN 13 to DN 50

'Lilac Band' multi purpose hose for chemicals, acids (except for concentr. oxidising acids), alkalis, salt solutions, alcohols, polar solvents, acetates, aldehydes, ester, ketones, hot cooling water, hot air, not oily.
Temperature range -40° up to +100° C (depending on medium). Open steam cleaning up to +150° C / max. 30 min.
Not suitable for aliphatic, aromatic and halogenated hydrocarbons, fuels, chlorine, chloride, ether, tar oils and oxidising acids.

Additional Info

42

0

Type CHS
CHS
Type CHS

Chemical Host for suction + discharge (with steel helix)

'Lilac Band' multi purpose hose for chemicals, acids (except for concentr. oxidising acids), alkalis, salt solutions, alcohols, polar solvents, acetates, aldehydes, ester, ketones, hot cooling water, hot air, not oily.
Temperature range -40° up to +100° C (depending on medium). Open steam cleaning up to +150° C / max. 30 min.
Not suitable for aliphatic, aromatic and halogenated hydrocarbons, fuels, chlorine, chloride, ether, tar oils and oxidising acids.

DN 25 to DN 150

'Lilac Band' multi purpose hose for chemicals, acids (except for concentr. oxidising acids), alkalis, salt solutions, alcohols, polar solvents, acetates, aldehydes, ester, ketones, hot cooling water, hot air, not oily.
Temperature range -40° up to +100° C (depending on medium). Open steam cleaning up to +150° C / max. 30 min.
Not suitable for aliphatic, aromatic and halogenated hydrocarbons, fuels, chlorine, chloride, ether, tar oils and oxidising acids.

Additional Info

43

0

Type LMD / LMS
LMD / LMS
Type LMD / LMS

Solvent Hose (without / with steel helix)

Solvent hose 'Blue Band' for most solvents, paints (also water based), water lacquer, petroleum products, alcohols, aldehydes, esters and ketones.
In short term operation also suitable for aromatic and chlorinated hydrocarbons. Further details see resistance chart.
Temperature range -20° up to +80° C, short term up to +100° C. Open steam cleaning up to +130° C / max. 30 min.

DN 13 to DN 150

Solvent hose 'Blue Band' for most solvents, paints (also water based), water lacquer, petroleum products, alcohols, aldehydes, esters and ketones.
In short term operation also suitable for aromatic and chlorinated hydrocarbons. Further details see resistance chart.
Temperature range -20° up to +80° C, short term up to +100° C. Open steam cleaning up to +130° C / max. 30 min.

Additional Info

44

0

Type LMD
LMD
Type LMD

Solvent Hose for pressure only (without helix)

Solvent hose 'Blue Band' for most solvents, paints (also water based), water lacquer, petroleum products, alcohols, aldehydes, esters and ketones. In short term operation also suitable for aromatic and chlorinated hydrocarbons.
Further details see resistance chart.
Temperature range -20° up to +80° C, short term up to +100° C. Open steam cleaning up to +130° C / max. 30 min.

DN 9 to DN 25

Solvent hose 'Blue Band' for most solvents, paints (also water based), water lacquer, petroleum products, alcohols, aldehydes, esters and ketones. In short term operation also suitable for aromatic and chlorinated hydrocarbons.
Further details see resistance chart.
Temperature range -20° up to +80° C, short term up to +100° C. Open steam cleaning up to +130° C / max. 30 min.

Additional Info

45

0

Type LMS
LMS
Type LMS

Solvent Hose for suction + discharge (with steel helix)

Solvent hose 'Blue Band' for most solvents, paints (also water based), water lacquer, petroleum products, alcohols, aldehydes, esters and ketones. In short term operation also suitable for aromatic and chlorinated hydrocarbons.
Further details see resistance chart.
Temperature range -20° up to +80° C, short term up to +100° C. Open steam cleaning up to +130° C / max. 30 min.

DN 25 to DN 150

Solvent hose 'Blue Band' for most solvents, paints (also water based), water lacquer, petroleum products, alcohols, aldehydes, esters and ketones. In short term operation also suitable for aromatic and chlorinated hydrocarbons.
Further details see resistance chart.
Temperature range -20° up to +80° C, short term up to +100° C. Open steam cleaning up to +130° C / max. 30 min.

Additional Info

46

0

Type UTD / UTS
UTD / UTS
Type UTD / UTS

Universal Tank Hose (without / with helix)

Blue-white-blue universal tank hoses for almost all liquid and pasty chemical and petroleum based products and solvents.
Temperature range -30° up to +100° C depending on medium. Steaming out for cleaning and sterilisation permissable up to +130° C up to max. 30 minutes (open ends).
Meets EN 12115.

DN 13 to DN 150

Blue-white-blue universal tank hoses for almost all liquid and pasty chemical and petroleum based products and solvents.
Temperature range -30° up to +100° C depending on medium. Steaming out for cleaning and sterilisation permissable up to +130° C up to max. 30 minutes (open ends).
Meets EN 12115.

Additional Info

47

0

Type UTD
UTD
Type UTD

Universal Tank Hose (without helix)

Blue-white-blue universal tank hoses for almost all liquid and pasty chemical and petroleum based products and solvents.
Temperature range -30° up to +100° C depending on medium. Steaming out for cleaning and sterilisation permissable up to +130° C up to max. 30 minutes (open ends).
Meets EN 12115.

DN 13 to DN 38

Blue-white-blue universal tank hoses for almost all liquid and pasty chemical and petroleum based products and solvents.
Temperature range -30° up to +100° C depending on medium. Steaming out for cleaning and sterilisation permissable up to +130° C up to max. 30 minutes (open ends).
Meets EN 12115.

Additional Info

48

0

Type UTS
UTS
Type UTS

Universal Tank Hose (with steel helix)

Blue-white-blue universal tank hoses for almost all liquid and pasty chemical and petroleum based products and solvents.
Temperature range -30° up to +100° C depending on medium. Steaming out for cleaning and sterilisation permissable up to +130° C up to max. 30 minutes (open ends).
Meets EN 12115.

DN 19 to DN 150

Blue-white-blue universal tank hoses for almost all liquid and pasty chemical and petroleum based products and solvents.
Temperature range -30° up to +100° C depending on medium. Steaming out for cleaning and sterilisation permissable up to +130° C up to max. 30 minutes (open ends).
Meets EN 12115.

Additional Info

49

0

Type UTL
UTL
Type UTL

Universal Tank Hose 'Light' (with steel helix)

Blue-white-blue universal tank hoses for almost all liquid and pasty chemical and petroleum based products and solvents.
Temperature range -30° up to +100° C depending on medium. Steaming out for cleaning and sterilisation permissable up to +130° C up to max. 30 minutes (open ends).
Meets EN 12115.

DN 38 to DN 100

Blue-white-blue universal tank hoses for almost all liquid and pasty chemical and petroleum based products and solvents.
Temperature range -30° up to +100° C depending on medium. Steaming out for cleaning and sterilisation permissable up to +130° C up to max. 30 minutes (open ends).
Meets EN 12115.

Additional Info

50

0

Type PCD / PCS
PCD / PCS
Type PCD / PCS

'POLYPAL CLEAN' (without / with helix)

Universal hose POLYPAL CLEAN with light grey cover, for clean chemicals, cosmetics, paints and glues, washing and cleaning products, hygienic / sanitary products and foodstuffs, see resistance chart.
Temperature range -30° C up to +100° C, depending on medium. Steaming out for cleaning and sterilisation permissible up to +130° C, max. 30 minutes (open ends).
Meets EN 12115.

DN 13 to DN 100

Universal hose POLYPAL CLEAN with light grey cover, for clean chemicals, cosmetics, paints and glues, washing and cleaning products, hygienic / sanitary products and foodstuffs, see resistance chart.
Temperature range -30° C up to +100° C, depending on medium. Steaming out for cleaning and sterilisation permissible up to +130° C, max. 30 minutes (open ends).
Meets EN 12115.

Additional Info

51

0

Type PCD
PCD
Type PCD

Universal-Pharmacy-Hose 'Clean' (without helix)

Universal hose POLYPAL CLEAN with light grey cover, for clean chemicals, cosmetics, paints and glues, washing and cleaning products, hygienic / sanitary products and foodstuffs, see resistance chart.
Temperature range -30° C up to +100° C, depending on medium. Steaming out for cleaning and sterilisation permissible up to +130° C, max. 30 minutes (open ends).
Meets EN 12115.

DN 13 to DN 38

Universal hose POLYPAL CLEAN with light grey cover, for clean chemicals, cosmetics, paints and glues, washing and cleaning products, hygienic / sanitary products and foodstuffs, see resistance chart.
Temperature range -30° C up to +100° C, depending on medium. Steaming out for cleaning and sterilisation permissible up to +130° C, max. 30 minutes (open ends).
Meets EN 12115.

Additional Info

52

0

Type PCS
PCS
Type PCS

Universal-Pharmacy-Hose 'Clean' (with steel helix)

Universal hose POLYPAL CLEAN with light grey cover, for clean chemicals, cosmetics, paints and glues, washing and cleaning products, hygienic / sanitary products and foodstuffs, see resistance chart.
Temperature range -30° C up to +100° C, depending on medium. Steaming out for cleaning and sterilisation permissible up to +130° C, max. 30 minutes (open ends).
Meets EN 12115.

DN 25 to DN 100

Universal hose POLYPAL CLEAN with light grey cover, for clean chemicals, cosmetics, paints and glues, washing and cleaning products, hygienic / sanitary products and foodstuffs, see resistance chart.
Temperature range -30° C up to +100° C, depending on medium. Steaming out for cleaning and sterilisation permissible up to +130° C, max. 30 minutes (open ends).
Meets EN 12115.

Additional Info

58

0

Type PTFE D / PTFE
PTFE D / PTFE
Type PTFE D / PTFE

ELAFLON PLUS PTFE (without / with helix)

Universal hose ELAFLON PTFE with electrically conductive, seamless lining of PTFE (Polytetrafluorethylene). Suitable for all commonly used chemicals, see resistance chart.
Suitable for both suction and delivery (Type PTFE D = delivery). Working pressure up to 16 bar, burst pressure >64 bar.
Temperature range from -30° up to +150° Celsius (depending on medium). Chemical resistance see resistance chart. Steaming out for cleaning and sterilisation permissible up to +150° C, max. 30 min.
Meets EN 12115. FDA und USP Class VI conform according EC regulations 1935/2004 and 10/2011.

DN 13 to DN 100

Universal hose ELAFLON PTFE with electrically conductive, seamless lining of PTFE (Polytetrafluorethylene). Suitable for all commonly used chemicals, see resistance chart.
Suitable for both suction and delivery (Type PTFE D = delivery). Working pressure up to 16 bar, burst pressure >64 bar.
Temperature range from -30° up to +150° Celsius (depending on medium). Chemical resistance see resistance chart. Steaming out for cleaning and sterilisation permissible up to +150° C, max. 30 min.
Meets EN 12115. FDA und USP Class VI conform according EC regulations 1935/2004 and 10/2011.

Additional Info

59

0

Type PTFE D
PTFE D
Type PTFE D

ELAFLON PLUS PTFE (without helix)

Universal hose ELAFLON PTFE with electrically conductive, seamless lining of PTFE (Polytetrafluorethylene). Suitable for all commonly used chemicals, see resistance chart.
Suitable for both suction and delivery (Type PTFE D = delivery). Working pressure up to 16 bar, burst pressure >64 bar.
Temperature range from -30° up to +150° Celsius (depending on medium). Chemical resistance see resistance chart. Steaming out for cleaning and sterilisation permissible up to +150° C, max. 30 min.
Meets EN 12115. FDA und USP Class VI conform according EC regulations 1935/2004 and 10/2011.

DN 13 to DN 25

Universal hose ELAFLON PTFE with electrically conductive, seamless lining of PTFE (Polytetrafluorethylene). Suitable for all commonly used chemicals, see resistance chart.
Suitable for both suction and delivery (Type PTFE D = delivery). Working pressure up to 16 bar, burst pressure >64 bar.
Temperature range from -30° up to +150° Celsius (depending on medium). Chemical resistance see resistance chart. Steaming out for cleaning and sterilisation permissible up to +150° C, max. 30 min.
Meets EN 12115. FDA und USP Class VI conform according EC regulations 1935/2004 and 10/2011.

Additional Info

60

0

Type PTFE
PTFE
Type PTFE

ELAFLON PLUS PTFE (with helix)

Universal hose ELAFLON PTFE with electrically conductive, seamless lining of PTFE (Polytetrafluorethylene). Suitable for all commonly used chemicals, see resistance chart.
Suitable for both suction and delivery (Type PTFE D = delivery). Working pressure up to 16 bar, burst pressure >64 bar.
Temperature range from -30° up to +150° Celsius (depending on medium). Chemical resistance see resistance chart. Steaming out for cleaning and sterilisation permissible up to +150° C, max. 30 min.
Meets EN 12115. FDA und USP Class VI conform according EC regulations 1935/2004 and 10/2011.

DN 19 to DN 100

Universal hose ELAFLON PTFE with electrically conductive, seamless lining of PTFE (Polytetrafluorethylene). Suitable for all commonly used chemicals, see resistance chart.
Suitable for both suction and delivery (Type PTFE D = delivery). Working pressure up to 16 bar, burst pressure >64 bar.
Temperature range from -30° up to +150° Celsius (depending on medium). Chemical resistance see resistance chart. Steaming out for cleaning and sterilisation permissible up to +150° C, max. 30 min.
Meets EN 12115. FDA und USP Class VI conform according EC regulations 1935/2004 and 10/2011.

Additional Info

61

0

Type FEP D / FEP
FEP D / FEP
Type FEP D / FEP

ELAFLON PLUS FEP (without / with helix)

Universal hose ELAFLON PLUS FEP with seamless FEP lining, resistant to all commonly used chemicals, see resistance chart.
Suitable for both suction and delivery (Type FEP D = delivery only). W.P. up to 16 bar, burst pressure >64 bar.
Temperature range from -30° C up to +100° C, briefly up to +130° C. Steaming out for cleaning and sterilisation permissible up to +150° C, max. 30 min (open system).
Meets EN 12115.

DN 13 to DN 100

Universal hose ELAFLON PLUS FEP with seamless FEP lining, resistant to all commonly used chemicals, see resistance chart.
Suitable for both suction and delivery (Type FEP D = delivery only). W.P. up to 16 bar, burst pressure >64 bar.
Temperature range from -30° C up to +100° C, briefly up to +130° C. Steaming out for cleaning and sterilisation permissible up to +150° C, max. 30 min (open system).
Meets EN 12115.

Additional Info

62

0

Type FEP D
FEP D
Type FEP D

Universal-Hose (without helix)

Universal hose ELAFLON PLUS FEP with seamless FEP lining, resistant to all commonly used chemicals, see resistance chart.
Suitable for both suction and delivery (Type FEP D = delivery only). W.P. up to 16 bar, burst pressure >64 bar.
Temperature range from -30° C up to +100° C, briefly up to +130° C. Steaming out for cleaning and sterilisation permissible up to +150° C, max. 30 min (open system).
Meets EN 12115.

DN 13 to DN 25

Universal hose ELAFLON PLUS FEP with seamless FEP lining, resistant to all commonly used chemicals, see resistance chart.
Suitable for both suction and delivery (Type FEP D = delivery only). W.P. up to 16 bar, burst pressure >64 bar.
Temperature range from -30° C up to +100° C, briefly up to +130° C. Steaming out for cleaning and sterilisation permissible up to +150° C, max. 30 min (open system).
Meets EN 12115.

Additional Info

63

0

Type FEP
FEP
Type FEP

Universal-Hose (with helix)

Universal hose ELAFLON PLUS FEP with seamless FEP lining, resistant to all commonly used chemicals, see resistance chart.
Suitable for both suction and delivery (Type FEP D = delivery only). W.P. up to 16 bar, burst pressure >64 bar.
Temperature range from -30° C up to +100° C, briefly up to +130° C. Steaming out for cleaning and sterilisation permissible up to +150° C, max. 30 min (open system).
Meets EN 12115.

DN 19 to DN 100

Universal hose ELAFLON PLUS FEP with seamless FEP lining, resistant to all commonly used chemicals, see resistance chart.
Suitable for both suction and delivery (Type FEP D = delivery only). W.P. up to 16 bar, burst pressure >64 bar.
Temperature range from -30° C up to +100° C, briefly up to +130° C. Steaming out for cleaning and sterilisation permissible up to +150° C, max. 30 min (open system).
Meets EN 12115.

Additional Info

64

0

Type FXD
FXD
Type FXD

Universal-Helical-Hose

Fluorflex 2 is a new generation high performance chemical hose to DIN 26054, combining the universal chemical resistance of PTFE with exceptional flexibility
and tight bending radius.

It is the only known hose with a corrugated PTFE-lining which is available in coils, and suitable for on-site fitting assembly. Long lead times or the necessity to stock complete hose assemblies not longer apply.

The requirements 'Ω/T conductivity' (may be used in EX-zones), FDA conformity and high temperature resistance are also satisfied by Fluorflex.

DN 20 to DN 50

Fluorflex 2 is a new generation high performance chemical hose to DIN 26054, combining the universal chemical resistance of PTFE with exceptional flexibility
and tight bending radius.

It is the only known hose with a corrugated PTFE-lining which is available in coils, and suitable for on-site fitting assembly. Long lead times or the necessity to stock complete hose assemblies not longer apply.

The requirements 'Ω/T conductivity' (may be used in EX-zones), FDA conformity and high temperature resistance are also satisfied by Fluorflex.

Additional Info

65

0

Type EPH /
Type EPH-OHM /
Type EPH-OHM G
EPH
Type EPH /
Type EPH-OHM /
Type EPH-OHM G

ELAPHARM electrically isolating 'I', blue cover.
Corresponds to DIN 26055-3 / EN 16820, Type A. FDA conform.
Homogeneous elastomer hose construction with smooth, white Teflon® PTFE liner.

DN 13 to DN 50

Additional Info

66

0

Type EPH
EPH
Type EPH

Electrically isolating 'I'.
Blue EPDM Cover, Lining PTFE white.

ELAPHARM electrically isolating 'I', blue cover.
Corresponds to DIN 26055-3 / EN 16820, Type A. FDA conform.
Homogeneous elastomer hose construction with smooth, white Teflon® PTFE liner.

DN 13 to DN 50

Additional Info

67

0

Type EPH OHM Gray
EPH OHM Gray
Type EPH OHM Gray

Electrically conductive Ω/T.
Grey EPDM Cover, Lining PTFE black.

ELAPHARM OHM G electrically conductive 'Ω / T', light grey cover.
Corresponds to DIN 26055-3 / EN 16820, Type A. FDA conform.
Homogeneous elastomer hose construction with smooth, black Teflon® PTFE liner.

DN 13 to DN 50

ELAPHARM OHM G electrically conductive 'Ω / T', light grey cover.
Corresponds to DIN 26055-3 / EN 16820, Type A. FDA conform.
Homogeneous elastomer hose construction with smooth, black Teflon® PTFE liner.

Additional Info

68

0

Type EPH-OHM
EPH-OHM
Type EPH-OHM

Electrically conductive Ω/T.
Black EPDM Cover, Lining PTFE black.
only on request

ELAPHARM OHM G electrically conductive 'Ω / T', black cover.
Corresponds to DIN 26055-3 / EN 16820, Type A. FDA conform.
Homogeneous elastomer hose construction with smooth, black Teflon® PTFE liner.

DN 13 to DN 50

ELAPHARM OHM G electrically conductive 'Ω / T', black cover.
Corresponds to DIN 26055-3 / EN 16820, Type A. FDA conform.
Homogeneous elastomer hose construction with smooth, black Teflon® PTFE liner.

Additional Info

69

0

Type ElaSil®
ELS
Type ElaSil®

ElaSil® silicone hose for cosmetics, pharmaceuticals and foodstuffs (with helix)

Silicone hose assemblies for high media purity requirements.

DN 13 to DN 102

Silicone hose assemblies for high media purity requirements.

Additional Info

70

0

Type FHD
FHD
Type FHD

Marine Collapsable Hose (without helix)

Type FHD is a collapsible marine bunkering hose. lt can be reeled up flat, takes few place to stow away and is easy to handle.
Used as pressure hose for all petroleum based products with an aromatic content up to 50 %, on bunkering ships, tankers as well as 'flexible pipeline'. Suitable for naval mobile supply and for offshore facilities.
Meets German military standard VG 95 955 and EN 1765, type L.

DN 75 to DN 254

Type FHD is a collapsible marine bunkering hose. lt can be reeled up flat, takes few place to stow away and is easy to handle.
Used as pressure hose for all petroleum based products with an aromatic content up to 50 %, on bunkering ships, tankers as well as 'flexible pipeline'. Suitable for naval mobile supply and for offshore facilities.
Meets German military standard VG 95 955 and EN 1765, type L.

Additional Info

71

0

Type STW
STW
Type STW

Marine Hose (with helix)

Type STW is a marine suction and discharge hose for tanker vessels, also suitable for gravity discharge because the helix helps to keep the diameter round. As light bunker hose for all petroleum based products with an aromatic content up to 50 %, on bunkering ships, tankers and other ships. Ideal also as flexible duct for floating bridges to compensate for level differences.
Meets German military standard VG 95 955 and EN 1765, type S.

DN 50 to DN 200

Type STW is a marine suction and discharge hose for tanker vessels, also suitable for gravity discharge because the helix helps to keep the diameter round. As light bunker hose for all petroleum based products with an aromatic content up to 50 %, on bunkering ships, tankers and other ships. Ideal also as flexible duct for floating bridges to compensate for level differences.
Meets German military standard VG 95 955 and EN 1765, type S.

Additional Info

73

0

Type SBL
SBL
Type SBL

Bunkering-Hose (without helix)

Type SBL is a light weight and very flexible collapsible hose without helix for pressure service.
Meets category L 10 of EN 1765.
Suitable for manual handling, very flexible. The reinforcement is constructed in such a way that the hose keeps its whole diameter even with 1 bar flow pressure.
Type SBL is not suitable for gravity discharge and for suction.
Please avoid permanent kinking.

DN 100 to DN 250

Type SBL is a light weight and very flexible collapsible hose without helix for pressure service.
Meets category L 10 of EN 1765.
Suitable for manual handling, very flexible. The reinforcement is constructed in such a way that the hose keeps its whole diameter even with 1 bar flow pressure.
Type SBL is not suitable for gravity discharge and for suction.
Please avoid permanent kinking.

Additional Info

74

0

Type SBS
SBS
Type SBS

Bunkering-Hose (with helix)

Type SBS is the heavy standard bunkering hose with steel helix for suction and discharge.
Meets EN 1765 category S 15.
Recommended for crane operated dockside loading and unloading in harbours and refineries. Very robust and kink resistant. Electrically conductive due to metallic connection of steel helix with the hose tail.
On request, available in a non-electrically conductive version.

DN 150 to DN 300

Type SBS is the heavy standard bunkering hose with steel helix for suction and discharge.
Meets EN 1765 category S 15.
Recommended for crane operated dockside loading and unloading in harbours and refineries. Very robust and kink resistant. Electrically conductive due to metallic connection of steel helix with the hose tail.
On request, available in a non-electrically conductive version.

Additional Info

75

0

Type HB
HB
Type HB

Hose for Hot Asphalt (with steel helix)

Hot Bitumen hose 'Brown Band', for filling of hot bitumen and heavy fuel oil.
Temperature range -25° C to max. +200° C.
Not suitable for lignite-tar oil and coal-tar oils.
Meets EN 13482.

DN 50 to DN 100

Hot Bitumen hose 'Brown Band', for filling of hot bitumen and heavy fuel oil.
Temperature range -25° C to max. +200° C.
Not suitable for lignite-tar oil and coal-tar oils.
Meets EN 13482.

Additional Info

76

0

Type HB-ST
HB-ST
Type HB-ST

Tar spraying and bitumen hose for road construction machines. (without / with steel helix)

Pressure hose for road construction machines, especially for hot bitumen and heavy heating oil.
Temperature range: - 25° C up to + 220° C.
Meets EN 13482, Type 2 SB/B (DN 19 and DN 32 analogue).

PLEASE NOTE: Not suitable for brown coal tar oil and coal oil (toluene).
Read the safety hints for the use of hot bitumen hoses on catalogue page 136.
Permanent operation temperatures above 220° C significantly reduces hose lifetime.

DN 19 to DN 50

Pressure hose for road construction machines, especially for hot bitumen and heavy heating oil.
Temperature range: - 25° C up to + 220° C.
Meets EN 13482, Type 2 SB/B (DN 19 and DN 32 analogue).

PLEASE NOTE: Not suitable for brown coal tar oil and coal oil (toluene).
Read the safety hints for the use of hot bitumen hoses on catalogue page 136.
Permanent operation temperatures above 220° C significantly reduces hose lifetime.

Additional Info

78

0

Type SD PYROPAL (230)
SD PYROPAL (230)
Type SD PYROPAL (230)

Hose for Steam

Steam hose with steel braids for wet saturated steam up to 18 bar (+210° C) and hot water up to +120° C. For cold water up to 25 bar. Minimum burst pressure 180 bar (1:10 safety factor).
Not oil resistant.
Meets EN ISO 6134 Type 2A.

DN 13 to DN 50

Steam hose with steel braids for wet saturated steam up to 18 bar (+210° C) and hot water up to +120° C. For cold water up to 25 bar. Minimum burst pressure 180 bar (1:10 safety factor).
Not oil resistant.
Meets EN ISO 6134 Type 2A.

Additional Info

80

0

Type FWS PP St/St
FWS PP St/St
Type FWS PP St/St

Composite hose FWS
Lining Polypropylen

Multi-layer thermoplastic hoses (composite hoses) to EN 13765, for suction and pressure operation. Delivery as hose assembly.
PN 14 bar, temperature range -30° C up to +100° C (depending on medium).

DN 25 to DN 250

Multi-layer thermoplastic hoses (composite hoses) to EN 13765, for suction and pressure operation. Delivery as hose assembly.
PN 14 bar, temperature range -30° C up to +100° C (depending on medium).

Additional Info

81

0

Type FWS PP Al/St
FWS PP Al/St
Type FWS PP Al/St

Composite hose FWS
Lining Polypropylen

Multi-layer thermoplastic hoses (composite hoses) to EN 13765, for suction and pressure operation. Delivery as hose assembly.
PN 14 bar, temperature range -30° C up to +100° C (depending on medium).

DN 65 to DN 100

Multi-layer thermoplastic hoses (composite hoses) to EN 13765, for suction and pressure operation. Delivery as hose assembly.
PN 14 bar, temperature range -30° C up to +100° C (depending on medium).

Additional Info

82

0

Type FWS PP
FWS PP
Type FWS PP

Composite hose FWS
Lining Polypropylen

Multi-layer thermoplastic hoses (composite hoses) to EN 13765, for suction and pressure operation. Delivery as hose assembly.
PN 14 bar, temperature range -30° C up to +100° C (depending on medium).

DN 25 to DN 250

Multi-layer thermoplastic hoses (composite hoses) to EN 13765, for suction and pressure operation. Delivery as hose assembly.
PN 14 bar, temperature range -30° C up to +100° C (depending on medium).

Additional Info

83

0

Type FWS PTFE
FWS PTFE
Type FWS PTFE

Composite hose FWS
Lining PTFE

Multi-layer thermoplastic hoses (composite hoses) to EN 13765, for suction and pressure operation. Delivery as hose assembly.
PN 14 bar, temperature range -30° C up to +100° C (depending on medium).

DN 25 to DN 250

Multi-layer thermoplastic hoses (composite hoses) to EN 13765, for suction and pressure operation. Delivery as hose assembly.
PN 14 bar, temperature range -30° C up to +100° C (depending on medium).

Additional Info

84

0

Type FWS PA
FWS PA
Type FWS PA

Composite hose FWS
Lining Polyamide

Multi-layer thermoplastic hoses (composite hoses) to EN 13765, for suction and pressure operation. Delivery as hose assembly.
PN 14 bar, temperature range - 30° C up to + 100° C (depending on medium).

DN 50 to DN 100

Multi-layer thermoplastic hoses (composite hoses) to EN 13765, for suction and pressure operation. Delivery as hose assembly.
PN 14 bar, temperature range - 30° C up to + 100° C (depending on medium).

Additional Info

85

0

Type FWS VR
FWS VR
Type FWS VR

Composite hose FWS
Lining Polypropylene

Multi-layer thermoplastic hoses (composite hoses) to EN 13765, for suction and pressure operation. Delivery as hose assembly.
PN 7 bar, temperature range -30° C up to +80° C (depending on medium).

DN 75 to DN 250

Multi-layer thermoplastic hoses (composite hoses) to EN 13765, for suction and pressure operation. Delivery as hose assembly.
PN 7 bar, temperature range -30° C up to +80° C (depending on medium).

Additional Info

86

0

Type POLYPAL PLUS
POLYPAL PLUS
Type POLYPAL PLUS

Universal Chemical Hose (with steel helix)

Universal chemical hose POLYPAL PLUS with seamless, black, conductive UPE lining.
For almost all liquid and pasty chemical and petroleum based products and solvents, see resistance chart PAL hoses.
Temperature range -30° C up to +100° C, depending on medium. Steaming out for cleaning and sterilisation permissible up to +130° C, max. 30 minutes (open ends).
Meets EN 12115.

DN 13 to DN 100

Universal chemical hose POLYPAL PLUS with seamless, black, conductive UPE lining.
For almost all liquid and pasty chemical and petroleum based products and solvents, see resistance chart PAL hoses.
Temperature range -30° C up to +100° C, depending on medium. Steaming out for cleaning and sterilisation permissible up to +130° C, max. 30 minutes (open ends).
Meets EN 12115.

Additional Info

87

0

Type POLYPAL OIL
POLYPAL OIL
Type POLYPAL OIL

Universal Chemical Hose (with steel helix)

Special Version of type POLYPAL PLUS with petroleum resistant cover of Chloroprene (CR).
For refineries, petrochemical industry and terminals for the loading of road tankers. Due to the Chloroprene cover, POLYPAL OIL is also petroleum resistant from the outside. With seamless, black, conductive UPE lining.
For almost all liquid and pasty chemical and petroleum based products and solvents, see resistance chart PAL hoses.
Temperature range -30° C up to +100° C, depending on medium. Steaming out for cleaning and sterilisation permissible up to +130° C, max. 30 minutes (open ends).
Meets EN 12115.

DN 50 to DN 100

Special Version of type POLYPAL PLUS with petroleum resistant cover of Chloroprene (CR).
For refineries, petrochemical industry and terminals for the loading of road tankers. Due to the Chloroprene cover, POLYPAL OIL is also petroleum resistant from the outside. With seamless, black, conductive UPE lining.
For almost all liquid and pasty chemical and petroleum based products and solvents, see resistance chart PAL hoses.
Temperature range -30° C up to +100° C, depending on medium. Steaming out for cleaning and sterilisation permissible up to +130° C, max. 30 minutes (open ends).
Meets EN 12115.

Additional Info

88

0

Type CHEMOPAL D / SD
CHEMOPAL D / SD
Type CHEMOPAL D / SD

Chemical Hose (without / with helix)

Chemical hose CHEMOPAL for alkalis, acids, acetates, aldehydes, amines, esters, ethers and ketones.
Not suitable for aliphatic, aromatic, halogenated hydrocarbons and their derivates.
Temperature range (depending on medium) -40° bis +90° C). Steaming out for cleaning and sterilisation permissible up to +150° C / max. 30 min (open ends).
Meets EN 12115.

DN 13 to DN 150

Chemical hose CHEMOPAL for alkalis, acids, acetates, aldehydes, amines, esters, ethers and ketones.
Not suitable for aliphatic, aromatic, halogenated hydrocarbons and their derivates.
Temperature range (depending on medium) -40° bis +90° C). Steaming out for cleaning and sterilisation permissible up to +150° C / max. 30 min (open ends).
Meets EN 12115.

Additional Info

89

0

Type CHEMOPAL oW (Form D)
CHEMOPAL oW (Form D)
Type CHEMOPAL oW (Form D)

Chemical Hose (without steel helix)

Chemical hose CHEMOPAL for alkalis, acids, acetates, aldehydes, amines, esters, ethers and ketones.
Not suitable for aliphatic, aromatic, halogenated hydrocarbons and their derivates.
Temperature range (depending on medium) -40° bis +90° C). Steaming out for cleaning and sterilisation permissible up to +150° C / max. 30 min (open ends).
Meets EN 12115.

DN 13 to DN 50

Chemical hose CHEMOPAL for alkalis, acids, acetates, aldehydes, amines, esters, ethers and ketones.
Not suitable for aliphatic, aromatic, halogenated hydrocarbons and their derivates.
Temperature range (depending on medium) -40° bis +90° C). Steaming out for cleaning and sterilisation permissible up to +150° C / max. 30 min (open ends).
Meets EN 12115.

Additional Info

90

0

Type CHEMOPAL mW (Form SD)
CHEMOPAL mW (Form SD)
Type CHEMOPAL mW (Form SD)

Chemical Hose (with steel helix)

Chemical hose CHEMOPAL for alkalis, acids, acetates, aldehydes, amines, esters, ethers and ketones.
Not suitable for aliphatic, aromatic, halogenated hydrocarbons and their derivates.
Temperature range (depending on medium) -40° bis +90° C). Steaming out for cleaning and sterilisation permissible up to +150° C / max. 30 min (open ends).
Meets EN 12115.

DN 25 to DN 150

Chemical hose CHEMOPAL for alkalis, acids, acetates, aldehydes, amines, esters, ethers and ketones.
Not suitable for aliphatic, aromatic, halogenated hydrocarbons and their derivates.
Temperature range (depending on medium) -40° bis +90° C). Steaming out for cleaning and sterilisation permissible up to +150° C / max. 30 min (open ends).
Meets EN 12115.

Additional Info

91

0

Type TECNOPAL D / SD
TECNOPAL D / SD
Type TECNOPAL D / SD

Chemical Hose (without / with helix)

Chemical hose TECNOPAL for alkalis, acids, solutions, alcohols, polar solvents, acetates, aldehydes, esters, ketones, hot water, hot air (not oily).
Not suitable for aliphatic, aromatic, halogenated hydrocarbons and their derivates.
Temperature range (depending on medium) -40° bis +100° C. Steaming out for cleaning and sterilisation up to +150° C / max. 30 minutes (open ends).
Meets EN 12115.

DN 13 to DN 150

Chemical hose TECNOPAL for alkalis, acids, solutions, alcohols, polar solvents, acetates, aldehydes, esters, ketones, hot water, hot air (not oily).
Not suitable for aliphatic, aromatic, halogenated hydrocarbons and their derivates.
Temperature range (depending on medium) -40° bis +100° C. Steaming out for cleaning and sterilisation up to +150° C / max. 30 minutes (open ends).
Meets EN 12115.

Additional Info

92

0

Type TECNOPAL oW (Form D)
TECNOPAL oW (Form D)
Type TECNOPAL oW (Form D)

Chemical Hose (without steel helix)

Chemical hose TECNOPAL for alkalis, acids, solutions, alcohols, polar solvents, acetates, aldehydes, esters, ketones, hot water, hot air (not oily).
Not suitable for aliphatic, aromatic, halogenated hydrocarbons and their derivates.
Temperature range (depending on medium) -40° bis +100° C. Steaming out for cleaning and sterilisation up to +150° C / max. 30 minutes (open ends).
Meets EN 12115.

DN 13 to DN 50

Chemical hose TECNOPAL for alkalis, acids, solutions, alcohols, polar solvents, acetates, aldehydes, esters, ketones, hot water, hot air (not oily).
Not suitable for aliphatic, aromatic, halogenated hydrocarbons and their derivates.
Temperature range (depending on medium) -40° bis +100° C. Steaming out for cleaning and sterilisation up to +150° C / max. 30 minutes (open ends).
Meets EN 12115.

Additional Info

93

0

Type TECNOPAL mW (Form SD)
TECNOPAL mW (Form SD)
Type TECNOPAL mW (Form SD)

Chemical Hose (with steel helix)

Chemical hose TECNOPAL for alkalis, acids, solutions, alcohols, polar solvents, acetates, aldehydes, esters, ketones, hot water, hot air (not oily).
Not suitable for aliphatic, aromatic, halogenated hydrocarbons and their derivates.
Temperature range (depending on medium) -40° bis +100° C. Steaming out for cleaning and sterilisation up to +150° C / max. 30 minutes (open ends).
Meets EN 12115.

DN 25 to DN 150

Chemical hose TECNOPAL for alkalis, acids, solutions, alcohols, polar solvents, acetates, aldehydes, esters, ketones, hot water, hot air (not oily).
Not suitable for aliphatic, aromatic, halogenated hydrocarbons and their derivates.
Temperature range (depending on medium) -40° bis +100° C. Steaming out for cleaning and sterilisation up to +150° C / max. 30 minutes (open ends).
Meets EN 12115.

Additional Info

94

0

Type SOLVAPAL D / SD
SOLVAPAL D / SD
Type SOLVAPAL D / SD

Solvent Hose (without / with helix)

Solvent hose SOLVAPAL for most solvents, paints (also waterbased), water laquer, petroleum products, alcohols, alede hydes, esters and ketones. In short term operation also suitable for aromatic und chlorinated hydrocarbons.
Temperature range -20° bis +80° C, short term up to +100° C.
Steaming out for cleaning and sterilisation permissible up to +130° C, max. 30 minutes (open ends).
Meets EN 12115.

DN 19 to DN 150

Solvent hose SOLVAPAL for most solvents, paints (also waterbased), water laquer, petroleum products, alcohols, alede hydes, esters and ketones. In short term operation also suitable for aromatic und chlorinated hydrocarbons.
Temperature range -20° bis +80° C, short term up to +100° C.
Steaming out for cleaning and sterilisation permissible up to +130° C, max. 30 minutes (open ends).
Meets EN 12115.

Additional Info

95

0

Type SOLVAPAL oW (Form D)
SOLVAPAL oW (Form D)
Type SOLVAPAL oW (Form D)

Solvent Hose (without steel helix)

Solvent hose SOLVAPAL for most solvents, paints (also waterbased), water laquer, petroleum products, alcohols, alede hydes, esters and ketones. In short term operation also suitable for aromatic und chlorinated hydrocarbons.
Temperature range -20° bis +80° C, short term up to +100° C.
Steaming out for cleaning and sterilisation permissible up to +130° C, max. 30 minutes (open ends).
Meets EN 12115.

DN 19 to DN 32

Solvent hose SOLVAPAL for most solvents, paints (also waterbased), water laquer, petroleum products, alcohols, alede hydes, esters and ketones. In short term operation also suitable for aromatic und chlorinated hydrocarbons.
Temperature range -20° bis +80° C, short term up to +100° C.
Steaming out for cleaning and sterilisation permissible up to +130° C, max. 30 minutes (open ends).
Meets EN 12115.

Additional Info

96

0

Type SOLVAPAL mW (Form SD)
SOLVAPAL mW (Form SD)
Type SOLVAPAL mW (Form SD)

Solvent Hose (with steel helix)

Solvent hose SOLVAPAL for most solvents, paints (also waterbased), water laquer, petroleum products, alcohols, alede hydes, esters and ketones. In short term operation also suitable for aromatic und chlorinated hydrocarbons.
Temperature range -20° bis +80° C, short term up to +100° C.
Steaming out for cleaning and sterilisation permissible up to +130° C, max. 30 minutes (open ends).
Meets EN 12115.

DN 25 to DN 150

Solvent hose SOLVAPAL for most solvents, paints (also waterbased), water laquer, petroleum products, alcohols, alede hydes, esters and ketones. In short term operation also suitable for aromatic und chlorinated hydrocarbons.
Temperature range -20° bis +80° C, short term up to +100° C.
Steaming out for cleaning and sterilisation permissible up to +130° C, max. 30 minutes (open ends).
Meets EN 12115.

Additional Info

97

0

Type BUTAPAL
BUTAPAL
Type BUTAPAL

Liquid Petroleum Gas Hose according to EN 1762 (without steel helix)

BUTAPAL liquid petroleum gas hose to EN 1762. For propane, butane and their mixtures to EN 589. As the hose lining is resistant to diffusion the hose is also suitable for natural gas.
Not suitable for ammonia.
Rugged and long-lasting construction with low tensile braids. Burst pressure >100 bar.
Temperature range -40° C up to +70° C (Special LT type down to -50° C).
Approved by DVGW, approval No. DG-4621 AU 0049.

DN 10 to DN 100

BUTAPAL liquid petroleum gas hose to EN 1762. For propane, butane and their mixtures to EN 589. As the hose lining is resistant to diffusion the hose is also suitable for natural gas.
Not suitable for ammonia.
Rugged and long-lasting construction with low tensile braids. Burst pressure >100 bar.
Temperature range -40° C up to +70° C (Special LT type down to -50° C).
Approved by DVGW, approval No. DG-4621 AU 0049.

Additional Info
Last Update: 14.10.2019